How to Configure Legacy Devices to Run on Windows 7

TechNet Cut-n-Paste Reposting:  The Windows 7 driver store includes a small collection of drivers for legacy devices, mostly older printers, modems, scanners, infrared ports, PCMCIA controllers, and other oddball devices that don’t use Plug and Play connections. As you might suspect, Windows will not automatically set up such devices, and you’re rolling the dice if you find one of these old but still worthwhile devices and try to install an old driver.
But what if the device in question is valuable to you and can’t be easily replaced by a newer, supported one? Then by all means give it a try. Download the most recent hardware drivers you can find (ideally, for Windows XP or Windows Server 2003), and then use the Add Hardware wizard to complete the hardware setup process. Follow these steps:
  • If you’ve found a downloadable driver package or a CD that came with the device, look for a Setup program and run it. This option places the driver files on your hard disk and simplifies later installation steps.
  • Connect the new hardware to your computer. In the case of an internal device such as an add-in card, turn off the computer, add the device, and then restart.
  • Open Device Manager, select any item in the list of installed devices, and then click Add Legacy Hardware on the Action menu.
  • Click Next to skip past the Welcome screen. On the next wizard screen, choose how you want to select the device to be installed.
AUTOMATIC:  For printers, network cards, modems, and other devices that can be detected mechanically, the recommended method is to choose Search for and Install The Hardware Automatically.  After clicking Next, the wizard quickly runs a detection module that searches for anything on its list of non–Plug and Play devices.  If it finds the new device, it installs the driver automatically, and your work is finished.  If the wizard doesn’t find any new hardware, you’ll be prompted to click Next and look manually.
MANUAL:  If you have a driver on a disc, skip the detection process. Choose Install The Hardware That I Manually Select From A List (Advanced) and click Next.
  • From the Common Hardware Types list, select a hardware category (or the inclusive Show All Devices category) and click Next.
  • From the master list of available drivers, select the device manufacturer and the correct model. Click Next to continue. Follow the prompts to complete the wizard.
(Thanks Matt)

About blakehandler

BLAKE was a Microsoft MVP and award winning programmer with over 20+ years experience providing complete Windows and networking support for small to medium sized businesses. BLAKE is also Jazz Musician and Instructor for residential clients on the Los Angeles West Side.
This entry was posted in Know Where Know-How. Bookmark the permalink.

Leave a Reply

Fill in your details below or click an icon to log in: Logo

You are commenting using your account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s